How To Restore Timberland Boots Color

Download Commodity

Download Article

While the iconic yellowish Timberland boots were originally created to exist sturdy work boots, they have recently become a popular everyday shoe. Whether you're wearing them for utility or equally a fashion statement, Timberland boots need to be kept clean in social club to lengthen their life and to keep their yellow color bright. They are made of nubuck leather, then they need some special care. Keep your Timberland boots looking new by doing spot cleaning oft and caring for the leather properly.^[1]

1. ane

   Remove small-scale debris with a soft castor. Start any Timberland cleaning session past brushing off the boot. Beginning at the acme of the talocrural joint and castor back and forth all the way down the whole surface of the kick.^[2]

   • If you only have a minor amount of debris stuck to your boots, this low-cal brushing volition typically remove it. If there are deeper scuffs or lots of droppings, yous should use the brush to remove as much debris as possible before moving on to other cleaning methods.
   • You can utilize any clean, soft brush for cleaning your Timberland boots. However, the Timberland company does sell a kit that is made specifically for cleaning Timberland boots. You can also get a brush that is specifically made for brushing suede or nubuck, which is usually called a "suede castor."

2. two

   Remove scuff marks with an eraser. Utilise a simple pencil eraser, a generic suede eraser, or a Timberland cleaning bar to remove scuff marks on the surface of the boots. Rub the eraser or cleaning bar lightly over the marks until they disappear.^[iii]

   • The eraser or cleaning bar tin take care of about day-to-24-hour interval scuffs and calorie-free marks. They do not work well for removing basis-in clay or mud that has covered your whole boot.
   • Mr. Make clean Magic Eraser or a like make tin can besides help become out scuff marks. Become the marks a footling moisture before rubbing them with the eraser.^[iv]

   Advertisement

3. 3

   Castor the boot again. Once yous have erased all marks on the boot, use the brush to shine out the surface of the nubuck. The castor will likewise remove any eraser droppings that might remain.

   • Move the brush lightly across the surface of the boot, making sure to move it in ane management. This will ensure that the surface has a uniform wait when you are done cleaning it.

4. four

   Exercise spot cleaning on a regular ground. Keep your Timberland boots clean by removing dirt once per week. This is peculiarly important if they are worn on a daily basis, as dirt and grime tin can actually build upwards. With some weekly maintenance you can keep your boots looking fresh and new for a long fourth dimension.

Advertisement

1. i

   Buy nubuck cleaning and sealing products that match your boots. The products you lot use should exist designed for your boots' specific fabric. Timberland boots come in suede and leather styles, only the traditional Timberland kick is make of nubuck. Suede and nubuck can typically be cleaned with the same cleaner.

   • Make sure to purchase leather cleaning supplies that match the color of your leather. Look on the packaging of a potential product and brand sure that it tin can clean the yellow leather that a Timberland boot is normally made of.
   • If you are unsure of what product to purchase, go to your local boot and shoe repair store and ask if they sell any products that would be appropriate.

2. 2

   Remove the shoelaces. Take the shoelaces from each boot and set up them aside if they are make clean. If they are non clean, wash them past hand and let them dry completely before putting them back in your boots.

   • Wash the laces in warm soapy water until all of the clay has been removed. For a thorough cleaning job, scrub them together with the soap and then soak them in warm water. Once cleaned, hang them out to dry out.
   • You could also include them in a load of laundry in a washing auto. Keep in mind that if they are actually muddy, you lot will probably want to wash them separately from your apparel.

3. three

   Remove loose dirt and droppings with a soft-bristle castor. Brush off each boot with a castor to remove any dirt particles. Use a light touch, every bit you don't want to scratch the surface of your boots, but your soft-bristle castor should be prophylactic for your boots. Removing as much dirt as possible at the beginning will minimize the amount of scrubbing you lot take to do afterward on.

   • Don't forget the bottom of the Timberlands. The soles are particularly likely to pick up loose dirt and gravel that can exist brushed off easily before cleaning. If you don't brush this dirt off, you're probable to have a dingy mess on your hands and in your house.
   • Brushes work ameliorate than towels simply because they can become into the nooks and crannies of the boots; nonetheless, be careful when using a brush on leather boots, equally brushes with very difficult beard may scratch the leather.

4. 4

   Go on one mitt within the boot. While cleaning the boot, you lot need to focus on keeping its shape intact. Keeping one manus in the boot will apply reverse pressure against the area you are cleaning, keeping it from collapsing as yous scrub information technology.

   • You lot tin besides use your hand to push up on creases and wrinkles that you desire to go rid of. If you lot push upwards on them while cleaning, the combination of your pressure level and the moisture from the cleaner can reshape those areas.

5. v

   Scrub the soles with a toothbrush and mild dish lather. Rinse the rubber soles of the Timberland boots with water and scrub them with soap using a toothbrush. Gently scrape out any buildup that is in the soles. Rinse the soles with warm water to get out any remaining debris and inspect your work.

   • You could also use cotton swabs to get the dirt out of the tread. Dip the cotton swab in warm, soapy water and run it along the grooves until all of the dirt has been removed.

6. half dozen

   Scrub the outside of the boot with cleaner and water. Utilize your cleaner, warm h2o, and your soft brush to scrub the exterior of the upper part of the kick. Move the castor in i direction to keep the surface of the boot in adept shape. Too, try to use the minimum corporeality of pressure level you lot need to go any dirt off the surface. Keep scrubbing, and apply more cleaner if necessary, until the surface is clean.

   • Make certain to follow the directions on the cleaner to apply it and scrub out stains.
   • Yous can also use a soft toothbrush to really clean deep into the seams of the boots.

7. 7

   Use sandpaper to buff out remaining stains. If at that place are noticeable stains that take non been removed by cleaning the boots, you may exist able to buff them out with a pocket-sized slice of fine-dust sandpaper. Using a 400-grit sandpaper and a calorie-free bear upon, move the sandpaper in but i management, and terminate sanding as soon every bit the stain disappears.^[five]

   • This is a delicate process that should exist used as a last resort and y'all definitely don't want to sand besides hard. However, this volition get rid of some stubborn stains immediately.

8. 8

   Rinse the surface with a pocket-size amount of water. Once you are satisfied that the dirt and grime has been scrubbed out, it's time to rinse the surface. Apply a small corporeality of water to remove the cleaner residue and whatever remaining grime.

9. 9

   Do deep cleaning when necessary. How often you lot do deep cleaning depends on how ofttimes you lot wear your boots and how dirty they become when you vesture them. Overall, you should focus on cleaning them when they look muddy and spot cleaning will not suffice anymore. If you wear your boots daily and they get very dirty, yous may need to do deep cleaning on a weekly footing. If your boots stay relatively clean when you wear them, then yous may simply demand to clean them every month or 2.

   • If yous want to deodorize the interior of your boot, attempt spraying SteriShoe, Mycomist sanitizer, or Lysol antibacterial spray inside your shoe to impale any growing bacteria.^[6]

Advertisement

1. 1

   Support the shape of the boot with newspaper. If the kick appears misshapen after cleaning, y'all should reshape it earlier information technology dries. Typically, the toe of the kicking is the role that gets most out of shape from cleaning. To fix information technology, crumple up paper and stuff it down into the boot to push misshapen areas into place.

   • Y'all tin can use newspaper, scrap newspaper, extra paper bags, or whatsoever other type of newspaper to shape your boot.

2. two

   Let your boots air dry out for 24 hours. One time the cleaning amanuensis has been applied and whatever stains treated, let the boots air dry in warm air. They should take around 24 hours to dry completely, depending on how moisture they got during cleaning.^[7]

   • Do not place the boots most high rut, such equally a fire. High heat could potentially melt any glue holding the boot together, or destroy the leather parts of your boots.

3. 3

   Vitrify your boots. Once the boots are dry, they may notwithstanding await a little funny. This is because the surface of the nubuck is likely matted and needs some intendance. Use a clean, dry out brush to lightly brush the surface of the boot in one direction. This will brand the boots look like normal again.

   • If the boot is really matted, so much so that brushing it doesn't exercise much, concur the kick close to the steam from a kettle and and then scrub it with a toothbrush. The steam should untangle the matted nap, assuasive you to scrub information technology straight and make it stand up once more.

4. 4

   Condition or seal your boots. Pick a conditioner or sealer to protect the newly clean surface of your boots. Follow the directions on the packaging when applying it. In full general, these products are applied past putting a small amount of them on a make clean rag and wiping information technology over the entire surface of the boot.^[viii]

   • Conditioner is fabricated simply to keep the leather from drying out and will allow the leather to stretch a little so you lot can break the shoes in more than easily.^[ix] A h2o-proofing product is meant to assist proceed water from soaking into the leather. Both products can be great for your boots but they should not exist used at the same time.

Advertizement

Add together New Question

• Question

  How do y'all get scuff marks off Timberland boots?

  

  Marc Sigal is the Founder of ButlerBox, a dry cleaning and shoe care service based in Los Angeles, California. ButlerBox places custom-designed, contraction-resistant lockers in luxury apartment buildings, grade A office buildings, shopping centers, and other convenient locations and so you tin selection up and drop off items 24 hours a day, 7 days a week. Marc has a BA in Global and International Studies from the University of California, Santa Barbara.

  

  Shoe Intendance Specialist

  Expert Answer

• Question

  What tin I practise almost my Timberland shoes being ashy?

  

  Make clean them with a scrub castor and a cleaner designed for the specific type of material of which they are made.

• Question

  People telephone call me gay if I clothing Timberlands. Are they right?

  

  No. People tin can wear anything they want -- your clothes don't have anything to do with your sexuality.

Run into more answers

Enquire a Question

200 characters left

Include your e-mail address to get a bulletin when this question is answered.

Submit

Advertisement

Video

Things Y'all'll Demand

• Castor
• Towel
• Eraser or suede cleaning bar
• Dish soap
• Toothbrush
• Nubuck or suede cleaner
• Fine-grit sandpaper
• Nubuck or suede conditioner or water sealant
• Warm h2o

Most This Article

Article Summary X

To clean Timberland boots, first by removing the laces and washing them past hand with warm, soapy water. Then, utilise a soft-bristle brush to brush off whatsoever loose dirt or debris. Once all of the dirt and debris is gone, scrub the soles of your boots with a toothbrush and liquid dish soap. If at that place are stains on the outside of your boots, scrub them off using a nubuck cleaner and water. You can also gently buff them off using a piece of fine-grit sandpaper. To learn how to dry your Timberland boots afterward you clean them, whorl down!

Did this summary help you?

Thanks to all authors for creating a page that has been read one,522,265 times.

Did this article assist you?

Source: https://www.wikihow.com/Clean-Timberland-Boots

Share this post